Handleiding
Je bekijkt pagina 59 van 136
www.domo-elektro.be 59
EN
INSTALLATION
• Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and
the inside with a wet, lukewarm cloth. Dry the appliance o well.
• Let air circulate freely around the cabinet.
• Make sure there is sucient space to open the door.
• This cooling unit is not intended for use as a built-in appliance.
• Select a place with a strong, level oor.
• Avoid direct sunlight and heat. Direct sunlight may aect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
• Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on
the evaporator, and your refrigerator.
• Before connecting your refrigerator to the power supply, check that the voltage stated on the
rating label of your appliance corresponds to the voltage in your home. A dierent voltage
could damage the appliance.
• The plug is the only way to disconnect the device from the power supply, make sure it is always
easily accessible. To disconnect power to the device, turn o the device and then unplug it.
• After installation, leave the fridge for 6 hours before turning it on. This way the refrigerant can
settle.
• Allow the appliance to run empty for 12 hours so the compartment can cool to the appropriate
temperature.
• You can level the appliance using the adjustable legs. The adjustable legs can be adjusted by
screwing them in or out of the appliance.
Lift Lower
Bekijk gratis de handleiding van Domo DO91308C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Domo |
| Model | DO91308C |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 12606 MB |
