Domo DO252SV handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108/ 108

Afdrukken

Je bekijkt pagina 51 van 108

www.domo-elektro.be 51

EN

3. Remove the cover and remove the rotating oor brush from the oor nozzle.

4. Remove hairs and other dirt that have wrapped around the oor brush.

I If you do not clean the oor brush regularly, it will become damaged and your machine will

become unusable.

5. The rotating oor brush may be rinsed o under running water. Make sure that it is completely

dry before using it.

6. To ret the brush, place the right side of the brush against the gear and push the left side until

it clicks into place. Replace the cover until it clicks into place.

7. Push the nozzle back onto the stick. The machine is now again ready for use.

I Stuck hairs can damage the machine or your oor. Always remove the hairs stuck on the

brushes.

THE TUBE

Remove the tube and check it for blockages.

THE DUST RESERVOIR

Dirty lters will reduce the suction power drastically.

After every cleaning, clean the dust reservoir and the

lters to extend the life span of your machine.

I We advise replacing the lters regularly to ensure

an optimal operation of the machine.

1. Never exceed the maximum indicator on the

dust container. Remove the tube. Slide the dust

container release button down, and detach the

dust container from the motor part.

2. Empty the dust container by pressing the button

at the bottom of the dust container. The dust

container falls open and you can then remove the

coarse dirt. Close the dust container.

3. Hold the dust container (a), remove the HEPA lter

(b), and then lift out the lter compartment (c+d).

Turn the upper part anti-clockwise and pull the

lter holder (c) out of the outer coarse lter (d).

4. Wash all the parts under cold running water,

including the dust container.

5. Allow all the parts to dry completely before

reassembling them.

6. Make sure all the parts t together nicely when assembling before clicking the dust container

back into the motor part.

a

b

c

d

31

2

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108/ 108

Bekijk gratis de handleiding van Domo DO252SV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Domo (Stofzuiger)

Handleiding bekijken

Domo DO249SV

Stofzuiger - handleiding

Handleiding bekijken

Domo DO250SC

Stofzuiger - handleiding

Andere merken in Stofzuiger