Domo DO1073DV handleiding

120 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 39 van 120
www.domo-elektro.be 39
DE
Montieren Sie den Gri.
Die Klimaklasse gibt die minimale und maximale Umgebungstemperatur für den
ordnungsgemäßen Betrieb eines Gerätes an. Die Klimaklasse nden Sie auf dem Typenschild
auf der Innen- oder Rückseite des Gerätes.
SN: Subnormal: Umgebungstemperatur 10 °C bis 32 °C
N: Normal: Umgebungstemperatur 16 °C bis 32 °C
ST: Subtropen: Umgebungstemperatur 16 °C bis 38 °C
T: Tropen: Umgebungstemperatur 16 °C bis 43 °C
ÖFFNUNGSRICHTUNG DER TÜR ÄNDERN
Wenn Sie die Scharniere der Tür auf die andere Seite versetzen möchten, empfehlen wir, einen
anerkannten Fachmann zu kontaktieren und ihn diese Arbeiten durchführen zu lassen. Bevor Sie die
Önungsrichtung ändern, kontrollieren Sie, ob der Stecker aus der Steckdose gezogen wurde und
dass das Gerät leer ist.
Das Gerät nach dem Wechsel des Türanschlags erst mindestens 2 Stunden lang stehen lassen,
bevor es eingeschaltet wird. Dies ermöglicht das Absetzen des Kühlmittels.
Entfernen Sie die Schrauben der oberen Abdeckung.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It' s better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
Entfernen Sie die obere Abdeckung vom Gefrierschrank.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It' s better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
16

Bekijk gratis de handleiding van Domo DO1073DV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDomo
ModelDO1073DV
CategorieVriezer
TaalNederlands
Grootte9964 MB