Dometic VMD 2.5 Display handleiding
Handleiding
Je bekijkt pagina 12 van 56
EN
Problem Possible cause Suggested remedy
Fault: AC High Voltage The supply voltage is too high.
1. Verify the voltage is correct at the power source.
2. If the problem persists, contact a qualified service techni-
cian.
Fault: DC Low Voltage The battery capacity is reduced.
1. Charge or replace the battery bank.
2. If the problem persists, contact a qualified service techni-
cian.
Fault: DC High Voltage The supply voltage is too high.
1. Verify the voltage is correct at the power source.
2. If the problem persists, contact a qualified service techni-
cian.
An electrical part has failed.
Contact a qualified service technician.
Fault: Communication Loss
Electrical noise interference.
Ensure communication cables and connectors are not in close
proximity to power cables or large electrical equipment.
Fault: Overcurrent Alarm An electrical part has failed.
Contact a qualified service technician.
Airflow is restricted due an object in the airflow path.
Remove the obstruction from the heatsink cooling airflow
path.
Fault: High VFD Temperature
The cooling fan is not operating correctly.
Contact a qualified service technician.
Fault: Fan Fault An electrical part has failed.
Contact a qualified service technician.
Fault: Duplicate Zone Instance More than one unit in a network has been assigned to the
same zone ID.
Check the zone assignments on all units in the network to en-
sure each unit has a unique zone ID.
Fault: Low Refrigerant A mechanical interface has failed and lost refrigerant.
Contact a qualified service technician.
12
Bekijk gratis de handleiding van Dometic VMD 2.5 Display, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dometic |
| Model | VMD 2.5 Display |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7105 MB |
