Dometic FT7000P handleiding
Handleiding
Je bekijkt pagina 3 van 16
3
EN
Pro-Pedal Foot Throttle Intended Use
1.3 Supplemental Directives
To reduce the risk of accidents and injuries, please
observe the following directives before proceeding to
install this product:
• Read and follow all safety information and
instructions.
• Read and understand these instructions before
installing this product.
• The installation must comply with all applicable local
or national codes, including the latest edition of the
following standards:
U.S.A.
– American Boat and Yacht Council (ABYC)
1.4 General Safety Messages
WARNING: LOSS OF CONTROL HAZARD.
Failure to obey the following could result in
death or serious injury:
• Use only Dometic replacement parts and
components that are specifically approved for use
with the product.
• Avoid improper installation, adjustment, alterations,
service, or maintenance of the product.
• Do not modify this product in any way. Modification
can be extremely hazardous.
2 Intended Use
The Pro-Pedal Throttle, hereinaer referred to as engine
control, provides mechanical throttle operation for
inboard, outboard, inboard/outboard, and sterndrive
engines. The installer-provided control cables,
hereinaer referred to as cables, connect the engine
control to the boat engine. Inboard/outboard and
sterndrive engines are hereinaer referred to as I/O
engines. This engine control is only suitable for the
intended purpose and application in accordance with
these instructions.
This manual provides information that is necessary for the
proper installation of the engine control. Poor installation
and/or improper operating or maintenance will result in
unsatisfactory performance and a possible failure. The
manufacturer accepts no liability for any injury or damage
to the product resulting from:
• Incorrect assembly or connection
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express permission
from the manufacturer
• Use for purposes other than those described in this
manual
Dometic reserves the right to change product
appearance and product specifications.
3 General Information
This section provides general information about the
engine control and its components.
Dometic recommends the installation and use of an
emergency ignition interrupt. This switch should be
connected by a cord to the boat driver. Should the
driver be thrown from the helm position, the engine will
automatically shut off. This switch can be obtained from
most marine dealers and distributors.
I
The images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).
3.1 Compatibility
This engine control is compatible with engines from the
following manufacturers.
Engine Manufacturers
BRP/OMC Suzuki
Evinrude/Johnson Tohatsu
Honda US Marine
Mercury/MerCruiser Volvo
Nissan Yamaha
Bekijk gratis de handleiding van Dometic FT7000P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dometic |
| Model | FT7000P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1992 MB |
