Dometic FT7000P handleiding
Handleiding
Je bekijkt pagina 10 van 16
10
EN
Installation Pro-Pedal Foot Throttle
T
e
q
w
11 Inserting the Trunnion
q
Inner Cover
e
Cable
w
Trunnion
7. If using a cable with a trunnion, insert the trunnion
into the inner cover.
q
w
e
12 Securing the Cover
q
Flat-Head Phillips
Screw
e
Pan-Head Phillips
Screw
w
Outer Cover
8. Secure the outer cover with the flat-head Phillips
screws starting with the middle screw.
9. Screw in the pan-head Phillips screw.
5.2 Connecting the Cable to the
Engine
NOTICE: The cable must be disconnected from
the engine before making engine idle adjustments.
Adjusting the engine idle while the throttle cable is
connected to the engine may cause jamming action
against the idle stop, causing the engine control to not
function properly, resulting in damage to the engine
control, the cable, and the engine.
I
To prevent hard shiing, the cable must be free of
load (no load) when the throttle lever is in the idle
position.
q
w
e
r
13 Cable to Engine Control Connections
1
q
Idle Stop
e
Cable Terminal
w
Engine Throttle Lever
r
Throttle Cable
2
1
Figure represents generic engine.
2
3300/33C throttle cable shown
1. Make sure the engine control is in idle.
I
The engine throttle lever should rest lightly
against the idle stop on the carburetor.
2. Connect the cable to the engine throttle lever.
3. If using 3300/33C cables, tighten all lock nuts
against the adapters.
Bekijk gratis de handleiding van Dometic FT7000P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dometic |
| Model | FT7000P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1992 MB |
