DMT Alpha Series A1.9i handleiding
Handleiding
Je bekijkt pagina 16 van 40
4.6. Mounting Options
CAUTION
Restrict the access under the work area during rigging/derigging.
You can mount the device in 2 different ways:
•
to a rigging bar (LED screen below a rigging bar/ LED screen on top of a rigging bar)
•
•
to a truss
•
4.6.1. Mounting the Device to a Rigging Bar
4.6.1.1.
Hanging Installation
By the hanging installation, the device is installed below a rigging bar.
WARNING
Do not hang more devices than the maximum allowed number on one rigging bar.
The rigging bars are designed for hanging installation of 18 LED screens under each other. Do not hang more
than 18 LED screens under each other on one rigging bar.
WARNING
Do not mount the device to a rigging bar only by the magnet.
The LED screen and the rigging bar have magnetic strips. The magnetic strips are designed to help you align
the device to a rigging bar during installation.
• Make sure that the device is always held until installation is completed.•
• Do not let the device hang on a rigging bar only by the magnet.•
Before you start the installation of the LED screens, make sure that the rigging bar setup is leveled, as shown in
Fig. 14 and 15. For more information about leveling, see the user manual of the Single Rigging Bar/ Double
Rigging Bar (101820/101821).
Figure 14 Figure 15
15
c
Product code: 101812
Alpha Series A1.9i
Bekijk gratis de handleiding van DMT Alpha Series A1.9i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DMT |
| Model | Alpha Series A1.9i |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9579 MB |
