Dito Sama 602314 handleiding
Handleiding
Je bekijkt pagina 17 van 22
17
ATTENTION!
The previously described actions are prohibited!
1.2.6. RESIDUAL RISKS
The machine has several risks that were not completely eliminated from a design standpoint
or with the installation of adequate protection devices. Nevertheless, through this manual the
Manufacturer has taken steps to inform operators of such risks, carefully indicating the perso-
nal protection equipment to be used by them.
Sucient spaces are provided for during the machine installation stages in order to limit these
risks.
To preserve these conditions, the areas around the machine must always be:
• kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.);
• clean and dry;
• well lit.
For the Customer’s complete information, the residual risks remaining on the machine are
indicated below: such actions are to be considered incorrect and therefore strictly forbidden.
RESIDUAL RISK DESCRIPTION OF HAZARDOUS SITUATION
Slipping or falling The operator can slip due to water or dirt on the oor.
Burns/abrasions
(e.g. heating elements)
The operator deliberately or unintentionally touches some components
inside the machine without using protective gloves.
Electrocution Contact with live parts during maintenance operations carried out with the
electrical panel powered.
Sudden closing of the
lid
The operator for normal machine use could suddenly and deliberately
close the lid
Tipping of loads When handling the machine or the packing containing it, using unsuitable
lifting systems or accessories or with the load unbalanced.
2. NORMAL MACHINE USE
2.1. CHARACTERISTICS OF PERSONNEL TRAINED FOR NORMAL MACHINE USE
The Customer must make sure the personnel for normal machine use are adequately trained and
skilled in their duties, as well as ensuring their own safety and that of other persons. The Customer
must make sure his personnel have understood the instructions received and in particular those regar-
ding work hygiene and safety in use of the machine.
2.2. CHARACTERISTICS OF PERSONNEL QUALIFIED TO OPERATE ON THE MACHINE
The Customer is responsible for ensuring that persons assigned to the various duties:
• read and understand the manual;
• receive adequate training and instruction for their duties in order to perform them safely;
• receive specic training for correct machine use.
2.3. OPERATOR FOR NORMAL USE
He must have at least:
• knowledge of the technology and specic experience in operating the machine;
• adequate general basic education and technical knowledge for reading and understanding the
contents of the manual;
• including correct interpretation of the drawings, signs and pictograms;
• sucient technical knowledge for safely performing his duties as specied in the manual;
•
knowledge of the regulations on work hygiene and safety. In case of a signicant fault (e.g. short
circuits, wires coming out of the terminal block, motor failures, worn electrical cable sheathing, etc.),
the operator for normal machine use must:
• immediately deactivate the machine.
Bekijk gratis de handleiding van Dito Sama 602314, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602314 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2601 MB |