Dito Sama 602285 handleiding
Handleiding
Je bekijkt pagina 23 van 31
SPIRAL MACHINE
L10 / L22 / L33 / L42 / L53 / L62
pag. 25
6 Operation and use
6.1 Checks and verifications for safe use of the machine
Remember that:
• the machine can be used by only one operator at a time;
• the operator must never leave the machine unattended when it is turned on. If if is necessary to leave
the workplace, disconnect the machine from the power supply;
• the user must not tamper with or alter the operation or efficiency of the protective devices on the
machine;
• the user must possess the characteristics listed in the paragraph 2.1.2.
Before starting operations with the machine, on a daily basis, they will have to carry out checks to make sure
that all the safety conditions exist to avoid accidents.
To facilitate the operator, we list below the pre-start checks.
1. Check that the machine is clean and that the bowl does not contain foreign bodies.
2. Check that the machine is in a stable position on a flat, smooth and solid surface.
3. Check that the machine has been correctly connected to the power supply.
4. Check that the machine is equipped with all the pictograms and warning plates provided.
5. Visually check the general condition of the machine and that there is no damage or conditions of
obvious deformation, especially with regard to ageing, wear and fatigue.
6. Check the efficiency of the safety devices. If the machine has been tampered with, do not use the
machine.
6.2 Loading the ingredients
ATTENTION
DO NOT EXCEED THE MAXIMUM PERMITTED QUANTITIES OF THE
RESPECTIVE MACHINE MODEL USED REFERRED TO IN THE PARAGRAPH 3.2.
The recommended sequence for loading of the ingredients is as follows:
1. Pour the required amount of water into the bowl.
2. Pour in the flour (in the correct proportion with respect to the water) by positioning the bag inside the
bowl and cutting it with a cutting tool at the bottom in order to avoid the formation of dust clouds.
3. Next, add the other ingredients for the mixture, lifting the movable guard and pouring them into the bowl.
If the movable guard is raised while the machine is working, the machine stops; it is therefore necessary
to close the movable guard and restart the machine to complete the work cycle by pressing START.
ATTENTION
IT IS INADVISABLE TO INTRODUCE THE FLOUR INTO THE BOWL BEFORE THE
WATER BECAUSE THIS GENERATES COMPACT MASSES OF HIGH DENSITY
FLOUR IN THE MIXTURE THAT COULD CAUSE IRREGULAR MACHINE
OPERATION.
Bekijk gratis de handleiding van Dito Sama 602285, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602285 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3724 MB |
