Dito Sama 602285 handleiding
Handleiding
Je bekijkt pagina 15 van 31
SPIRAL MACHINE
L10 / L22 / L33 / L42 / L53 / L62
pag. 17
3.3 Environmental limits
Unless otherwise specified in the contract, it is understood that the machine can function properly only in the
environmental conditions referred to in the following points. Environmental conditions other than those
prescribed may cause malfunctions or breakages with consequent dangerous situations for the health of the
operator and of any exposed persons.
It is the task of the production plant manager to verify that these conditions are always met.
3.3.1 Explosion and/or fire
The machine was not designed to be used in places where substances in the form of a cloud of dust can
cause an explosive atmosphere with air.
EXPLOSION AND/OR FIRE HAZARD
THE MACHINE MUST NOT BE USED IN AREAS WITH EXPLOSION HAZARD OR
RISK OF FIRE.
3.3.2 Altitude
The machine is able to function properly at altitudes of up to 1000 meters above sea level.
3.3.3 Ambient air temperature
The electrical equipment works correctly at air temperatures of between +5°C and +40°C.
The electrical equipment is able to function properly when the relative humidity does not exceed 50% at a
maximum temperature of +40°C. Higher relative humidity levels are permitted at lower temperatures.
3.3.4 Vibrations and shocks
The machine must be installed on surfaces that do NOT transmit vibrations and in environments where there
is NO danger of impact with other mechanical assemblies.
3.3.5 Electromagnetic interference
The machine in question in this manual has been designed to operate correctly in an electromagnetic
environment of an industrial type.
3.3.6 Noise
The noise emission of the machine during normal operation is less than 70 dB.
3.3.7 Lighting
The plant's lighting system is to be considered important for the safety of persons. The installers of the
lighting system must comply, within the EEA, with the minimum requirement set by the UNI EN 12464-1
standard, relating to the natural and artificial lighting of premises. The minimum lighting must be such as to
guarantee the correct perception of symbols and marks.
The lighting level must always be such as to guarantee operation in the maximum possible safety.
The installation operations must be carried out in "normal" light conditions, that is, such as not to dazzle the
operator’s vision and not to strain it in case of low light.
Use battery lighting devices or devices installed on columns and connected to the plant's electricity supply
network. Do not aim the auxiliary lighting devices directly towards the operator's eyes in order to avoid
dazzling them.
3.3.8 Degree of protection of electrical equipment
The degree of protection with regard to the motor casings is IP23.
The degree of protection with regard to the enclosures of the control equipment is IP22.
Bekijk gratis de handleiding van Dito Sama 602285, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602285 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3724 MB |
