Dito Sama 602284 handleiding
Handleiding
Je bekijkt pagina 27 van 31
SPIRAL MACHINE
L10 / L22 / L33 / L42 / L53 / L62
pag. 29
8 Maintenance
8.1 Warnings
The user must set up a system (if this has not already been done) to record all the maintenance work
performed.
Failure to record an intervention is to be considered as "maintenance not performed".
All the maintenance information relates only to ordinary maintenance with interventions aimed at the correct
daily operation of the machine.
Maintenance must be carried out by the following categories of persons:
• specialist mechanical maintenance technician: A qualified technician able to operate the machine in
normal conditions, to operate it with the protections disabled, to intervene on the mechanical parts to
perform all the necessary adjustments, maintenance and repairs;
• specialist electrical maintenance technician: A qualified technician capable of operating the machine
in normal conditions and operating it with the protections disabled; they are responsible for all electrical
adjustments, maintenance and repairs. They are capable of operating in the presence of voltage.
It is good practice to use only original materials for repairs in order to guarantee the safety of the machine in
any case.
Check that the tools available are suitable for use and always avoid the improper use of tools or equipment.
8.2 Precautions when undertaking maintenance
Maintenance personnel must be aware that carrying out these operations can cause dangers. It is therefore
necessary to comply with all the warnings contained in these user instructions.
The following are essential:
• use the personal protection equipment;
• avoid physical contact with moving parts of the machine;
• unqualified and unauthorised personnel must not enter the work area of the machine when it is under
maintenance;
PROHIBITION
PROHIBITION OF ACCESS TO THE WORK AREA OF THE MACHINE FOR NON-
QUALIFIED AND UNAUTHORISED PERSONNEL.
• the maintenance operations must be carried out with sufficient lighting; in the case of maintenance
located in areas that are not sufficiently illuminated, portable lighting devices must be used, taking care to
avoid shadow cones that prevent or reduce the visibility of the point to be worked on or the surrounding
areas (follow the instructions in the paragraph 3.3.6 “Lighting the operating environment").
ELECTRICITY HAZARD
MAINTENANCE OPERATIONS THAT REQUIRE THE PRESENCE OF ELECTRICITY,
SUCH AS TROUBLESHOOTING IN THE ELECTRICAL PANEL, MUST BE
PERFORMED ONLY BY QUALIFIED PERSONNEL FOLLOWING THE SAFETY
PROCEDURES FOR WORK INSIDE THE SYSTEM WHERE THE MACHINE IS
INSTALLED.
CHECK THAT GUARDS AND PROTECTIONS ARE EFFICIENT
THE GUARDS AND SAFETY DEVICES MAY BE REMOVED IN PART OR FULLY
DURING MAINTENANCE OPERATIONS BY SPECIALIST AND/OR AUTHORISED
Bekijk gratis de handleiding van Dito Sama 602284, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602284 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3724 MB |
