Dito Sama 602284 handleiding
Handleiding
Je bekijkt pagina 24 van 31
SPIRAL MACHINE
L10 / L22 / L33 / L42 / L53 / L62
pag. 26
6.3 Operation
To switch on the machine proceed as follows (refer to chapter 5):
1. follow the procedure given in the paragraph 6.2;
2. check that the mobile guard is closed;
3. adjust the cycle time using the CYCLE TIMER (if present) or set it towards the hand to proceed with the
cycle without a timer;
4. set the speed of the work cycle using the SPEED selector (if present);
5. press the START button to start the processing cycle;
6. the machine stops automatically at the end of the set time, if not if a time has been set for the working
cycle, press the STOP button to stop the machine manually.
To best preserve the functionality of the machine, it was defined the follow ‘’TIME ON’’ and TIME OFF’’
• L10 M: TIME ON 20min / TIME OFF 40min.
For the others models of the machine, a ‘’TIME ON’’ and a ‘’TIME OFF’’ has not been defined because it
is not necessary.
6.4 Removing the mixture
To facilitate removal of the mixture, it is possible to keep the START button pressed to operate the machine
manually and to allow the operator to rotate the bowl and remove the dough from different positions with the
mobile guard open.
ATTENTION
IT IS FORBIDDEN TO USE ANY TOOL THAT CAN SCRATCH OR DAMAGE THE
MACHINE AND MACHINE TOOLS.
6.5 Disconnection
When putting the machine out of service, it is advisable to:
1. Disconnect the machine from the electrical system.
2. Clean the machine carefully as indicated in the paragraph 8.4.4.
3. Protect the machine from atmospheric agents as indicated in the paragraph 4.6.
Bekijk gratis de handleiding van Dito Sama 602284, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602284 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3724 MB |
