Dito Sama 600450 handleiding
Handleiding
Je bekijkt pagina 3 van 7
Use and safety
Clean the machine properly prior to its first use
Uncontrolled closure of the lid or ram press involves a risk of crushing the fingers.
ATTENTION : Stop the machine before opening the cover
Never put a hand in the ejection area while the machine is in operation; risk of injury. It is strictly forbidden to put the safety systems
out of action or modify them: Risk of permanent injury!!!!
Check that the safety devices operate correctly each time before using (see paragraph on «safety system adjustments»).
Never introduce the hand into the bowl when the machine is on.
For health and safety reasons, always use a washable or disposable strong head covering that covers the hair completely.
ATTENTION: All operations, whether using, cleaning or maintenance, present risks of cuts; never force and always keep
hands a reasonable distance from cutting edges.
Always use appropriate protective equipment when carrying out these operations.
ATTENTION!!
3.1 OPERATION - SAFETY
• The user's safety is assured by:
- The motor stopping on releasing the lid.
- The need to have the bowl in position before it will start
- The need to press on the On button after each stoppage
("voltage loss’’ device).
-
The braked stoppage of the motor before accessing the rotor.
- Operation by sustained pressure to check the progress of
work.
- The automatic locking of the rotating rotor through its bayonet
system.
- The dimension of the centre pourer hole providing the means
for the addition of products in OPERATION.
- The design of the bowl (no-leak shaft).
- The easy removal of the bowl, the lid and its seal, the rotor
and the scraper for cleaning them.
• Control panel
1-speed model
A ON button.
B OFF button.
C ON button by sustained pressure.
2-speed model
A ON button at low speed.
B OFF button.
C ON button by sustained pressure at low speed.
D ON button high speed.
E Display of the speed selected
3.1
Variable speed model
A ON button at the selected speed.
B OFF button.
C ON button by sustained pressure at the selected speed.
E Display of the selected speed
F To increase the speed
G To decrease the speed
• The food processor can be started up if:
- The bowl is properly in place
- The locking pin is correctly engaged (see § 3.3)
- The lid is correctly locked.
a) Continual operation:
Press button A or D.
For the variable-speed model, the speed can be increased or
reduced while running or when at a stop by using the buttons
F or G.
b) Operation by sustained pressure:
Press button C and hold down. This provides the means for
controlling the progress of fine work.
c) Stop
Press button B
Note: Do not stop the food processor by releasing the lid.
3.2
3.2 CHOICE OF EQUIPMENT
• The food processor / emulsifier is fitted as standard with a
bowl-lid scraper and a very hard stainless steel dual-knife rotor
(smooth knives for the single speed models and micro-toothed
knives for the 2-speed and variable speed models).
Note: Optional rotors suitable for other work (see table §3.5).
PLEASE CONTACT US.
• Usage as a food processor / mixer is possible by removing
the scraper from the existing lid or by using a second lid with
no scraper for the following types of work:
- Minced meat, vegetables, etc.
- Grinding and reduction to powder.
- Kneading dough.
K45-55-70 GB 02 2018
3
Bekijk gratis de handleiding van Dito Sama 600450, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 600450 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 854 MB |
