Handleiding
Je bekijkt pagina 17 van 28
17
Fan/Ion(On some models) button
Control the fan speed. Press to select the fan speed in four steps-LOW,
MED, HIGH and AUTO. The fan speed indicator light illuminates under
dierent fan settings. When select AUTO fan speed, all the fan indicator
lights turn dark. On some models, when select AUTO fan speed, all the fan
indicator lights illuminate.
NOTE: Press this button for 3 seconds to initiate ION feature. The ion
generator is energized and will help to remove pollen and impurities from
the air, and trap them in the filter. Press it for 3 seconds again to stop the
ION feature.
Sleep (Eco) button
Used to initiate the SLEEP/ECO operation.
Power button
Power switch on/o.
LED display
Shows the set temperature in °C or °F(“°F” no display for some models)
and the Auto-timer settings. While on DRY and FAN modes, it shows the
room temperature. Shows Error codes and protection code: E1-Room
temperature sensor error. E2-Evaporator temperature sensor error. E3-
Condenser temperature sensor error (On some models). E4-Display panel
communication error. EC-Refrigerant leakage detection malfunction (On
some models).
P1-Bottom tray is full--Connect the drain hose and drain the collected
water away. If protection repeats,call for service. Note: When one of
the above malfunctions occurs, turn o the unit, and check for any
obstructions. Restart the unit, if the malfunction is still present, turn o the
unit and unplug the power cord. Contact the manufacturer or its service
agents or a similar qualified person for service.
15429_Dimplex DPRC35ECO Manual.indd 1715429_Dimplex DPRC35ECO Manual.indd 17 9/09/20 5:51 PM9/09/20 5:51 PM
Bekijk gratis de handleiding van Dimplex DPRC35ECO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dimplex |
| Model | DPRC35ECO |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3141 MB |
