Digitus DN-FS-6-2 handleiding
Handleiding
Je bekijkt pagina 7 van 65
7
• Do not use compressed gas or compressed air to clean the
ignite during the electrical discharge.
• Do not touch the electrodes when the splicer is switched on
and the device is supplied with power. The electrodes
cause severe electric shock or burns.
NOTE:
opened.
•
during the splicing process. Fiber splinters can be
extremely dangerous if they come into contact with the eye
or skin or are swallowed.
• Check the AC power source before use: The correct AC
power source is AC 100--60Hz. The correct direct
current source is DC 10-12V. The use of an unsuitable AC or
damage to the appliance and result
• AC generators usually generate an unusually high AC output
generator can cause smok
Ensure
that the generator is checked and serviced regularly.
•
heated or pulled excessively. The use of a damaged cable
Bekijk gratis de handleiding van Digitus DN-FS-6-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digitus |
| Model | DN-FS-6-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16514 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 2450 g |
| Breedte | 141 mm |
| Diepte | 156 mm |
| Hoogte | 156 mm |