Digitus DN-FS-6-2 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465/ 65

Afdrukken

Je bekijkt pagina 60 van 65

60

With �ssue paper dipped in alcohol to clean the new

electrodes, then, install the electrodes into the original

electrodes seat posi�on.

4. Close the electrodes cover and �ghten the screws.

5. Close the windproof cover and power on the machine.

6. Take an electrode aging.

7. Run 3 �mes fiber fusion if current fusion parameter is

Auto mode otherwise run Arc Test or Arc Calibrate if

current fusion parameter is normal or calibrate

Note: The replacement of the electrodes should be gentle, so

as not to damage the machine or stabbed himself.

5.3. Electrode aging

The electrodes arc begins unstably when the external

environment such as the temperature and pressure changed

greatly especially moving the machine from low al�tude to

high al�tude. When happened, users should take an electrode

aging to stabilize the electrodes arc. The machine runs 5 �mes

of huge electrodes arc when the user selects the electrodes

aging and executes it.

Note: Please according prompts to operate, do not open the

cover while electrodes aging

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465/ 65

Bekijk gratis de handleiding van Digitus DN-FS-6-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd