Digitus DN-FS-6-2 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465/ 65

Afdrukken

Je bekijkt pagina 34 van 65

34

The parameter consists of the following parameters:

Pre Fuse �me

Prefuse �me in total fusion process, a short �me about 30ms in

SM 16ms in MM. It is not recommended for the new user to

modify.

Fusion �me

Fuse �me in total fusion process, a long �me 2.0 seconds in

SM, 1.2 seconds in MM. It is not recommended for the new

user to modify.

Arc Data

Discharge current means that the discharge arc current

intensity. The high value of the current corresponds to a

greater arc, resul�ng in a higher temperature. The fiber is

ablated more seriously. Press the key or to increase or

decrease the parameter value.

Overlap

The pushing forward distance in fusion process. Press the key

or to add or sub the value of overlap.

Fiber Gap

The distance of fiber gap before fusing.

Press the key or to change it.

Endface

The angle between the fiber end and ver�cal direc�on is the

end face. In the process of judging the fiber end face, the fiber

end face should not more than the Max end face.

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465/ 65

Bekijk gratis de handleiding van Digitus DN-FS-6-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd