Digigram ALP222e-MIC handleiding
Handleiding
Je bekijkt pagina 21 van 67
User Manual – ALP222e
The clock source used at a given moment is displayed in
the "Sync Source" field, and its frequency value is given
by the "Sampling Rate" field.
9.2 Managing input and output levels
Note that after the first installation of the card, the default gain settings are as follows:
● Input analog gains are set to 0 dB (+24 dU -> 0 dBfs).
● Digital input and output gains are set to 0 dB
● The 8x8 routing matrix is configured this way:
- Play 1-2 routed to outputs 1-2
- Play 3-4 routed to outputs 3-4
- Inputs 1-2 (analog) routed to Rec 1-2
- Inputs 3-4 (AES2) routed to Rec 3-4
The other routing points of the matrix are muted.
Click on the icon to access the "I/O Monitor" view which is used to adjust audio levels.
The onboard mixer features two categories of audio inputs and audio outputs
● Physical inputs (analog and AES3)
● Software playback inputs. They correspond to the playback devices exposed by the driver to
the applications.
● Physical outputs (analog and AES3)
21
Bekijk gratis de handleiding van Digigram ALP222e-MIC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digigram |
| Model | ALP222e-MIC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9528 MB |
