Digigram ALP-DANTE-LE handleiding

42 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 18 van 42
User Manual for ALP-DANTE
Internal buffer: size of the buffers
exchanged between the card and the driver.
The size is expressed in samples (ex: at 48
kHz, a value of 48 corresponds to 1ms buffer).
Samples / Position update: This parameter
should not be modified without prior
technical advice from Digigram. It serves for
cases where audio dropouts are experienced
whatever is the internal buffer setting.
Sampling rate: Select the sampling rate of
the ALP-DANTE card. The ALP-X Manager
application must be closed before selecting a
new sampling rate value.
Select the new value, and click on “Ok”.
The PC must be restarted.
7.6 Replacing a card
If an ALP card has to be replaced by another one, it is strongly recommended to proceed as follows:
Turn off the PC.
Remove the card to be replaced.
Restart the PC.
Go to the Windows Device Manager, and select “Sound, video and game controllers”.
From the “View” menu, select “Show Hidden devices”.
Select the ALP card that was hidden and select “Uninstall”.
Turn off the PC.
Insert the new card.
Restart the PC.
7.7 Changing the order of installed cards
If several ALP cards are installed, and you want to move cards from a slot to another, it is strongly
recommended to proceed as follows:
Turn off the PC.
Remove the cards to be moved.
Restart the PC.
Go to the Windows Device Manager, and select “Sound, video and game controllers”.
From the “View” menu, select “Show Hidden devices”.
Select the ALP cards that were hidden and select “Uninstall”.
Turn off the PC.
Insert the cards in the appropriate slots.
Restart the PC.
18

Bekijk gratis de handleiding van Digigram ALP-DANTE-LE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDigigram
ModelALP-DANTE-LE
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9985 MB