Digi-Pas DWL5800XY handleiding
Handleiding
Je bekijkt pagina 64 van 73
Digi-Pas
®
© 2023 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 58
DWL-5x000XY DATA SHEET
7.4.7. Relay Mode
To trigger the relay output:
<< (To control box): 0x06, 0x20, 0x00, 0x6C, 0xCC, 0xBB, 0xBB, 0xBB, 0x00, 0x00, 0x00, 0x00
Byte [n] Command Descriptions
Byte [0] 0x06 From Computer
Byte [1] 0x20 Relay Mode
Byte [2] 0x00 Not Applicable
Byte [3]
0xCC
0xCC : Set Relay1 Output to Normally Open (NO)
0xBB : Set Relay1 Output to Normally Closed (NC)
Byte [4]
0xBB
0xCC : Set Relay2 Output to Normally Open (NO)
0xBB : Set Relay2 Output to Normally Closed (NC)
Byte [5] 0xBB 0xCC : Set Relay3 Output to Normally Open (NO)
0xBB : Set Relay3 Output to Normally Closed (NC)
Byte [6] 0xBB 0xCC: Set Relay4 Output to Normally Open (NO)
0xBB: Set Relay4 Output to Normally Closed (NC)
Byte [7]~[11] 0x00 Not Applicable
Data return from control box:
>> (From control box): 0x07, 0x06, 0x20, 0xAA, 0xBB, 0xBB, 0xBB, 0x00, 0x00, 0x00, 0x00, 0x00
Byte [n] Command Descriptions
Byte [0] 0x07 From Control Box
Byte [1] 0x06 To Computer
Byte [2] 0x20 Relay Mode
Byte [3]
0xAA
0xAA : Relay1 Output is set to Normally Open (NO)
0xBB : Relay1 Output is set to Normally Closed (NC)
Byte [4]
0xBB
0xAA : Relay2 Output is set to Normally Open (NO)
0xBB : Relay2 Output is set to Normally Closed (NC)
Byte [5] 0xBB 0xAA : Relay3 Output is set to Normally Open (NO)
0xBB : Relay3 Output is set to Normally Closed (NC)
Byte [6] 0xBB 0xAA : Relay4 Output is set to Normally Open (NO)
0xBB : Relay4 Output is set to Normally Closed (NC)
Byte [7]~[11] 0x00 Not Applicable
Bekijk gratis de handleiding van Digi-Pas DWL5800XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL5800XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
