Digi-Pas DWL5800XY handleiding
Handleiding
Je bekijkt pagina 61 van 73
Digi-Pas
®
© 2023 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 55
DWL-5x000XY DATA SHEET
Byte [n] Command Descriptions
Byte [0] 0x71 To control box / From Sensor 1
Byte [1] 0x1B Single Axis Position / Calibration Mode
Byte [2] 0x17 Calibration Feedback : Idle
Byte [3] 0x1E Calibration Count : 30
Byte [4] 0x13 Dummy
Byte [5] 0x03 Calibration Step 3 Ready
Byte [6] 0x88 Dummy
Byte [7]~[9] 0xDD Fixed Dummy
Byte [10] 0x22 CRC16 High
Byte [11] 0x93 CRC16 Low
10. For DWL5000XY model, repeat step 3 to step 8. Please locate the sensor module in fol-
lowing positions (refer to Figure 45 to Figure 50) respectively.
11. For DWL5500XY & DWL5800XY model, please perform only 4 steps calibration as shown in
Figure 43, 44, 49, and 50.
12. Once the following response is received, the calibration process is completed.
>> (From control box): 0x71, 0x2B, 0x17, 0x1E, 0x13, 0x08, 0x88, 0xDD, 0xDD, 0xDD, 0x22, 0x93
The sensor module will automatically change to dual axis mode and broadcast dual
axis angle measurement (Please refer to 7.4.2 Dual Axis Mode) after the calibration pro-
cess is completed.
Figure 45. Tilt Sensor Module Position of Calibration Step 3
Figure 46. Tilt Sensor Module Position of Calibration Step 4
Bekijk gratis de handleiding van Digi-Pas DWL5800XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL5800XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
