Digi-Pas DWL5800XY handleiding
Handleiding
Je bekijkt pagina 40 van 73
Digi-Pas
®
© 2023 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 34
DWL-5x000XY DATA SHEET
Source Destination Mode Data
1 Byte 1 Byte 1 Byte 1 Byte
Source (1 byte) : Sender command
Destination (1 byte) : Receiver command
Mode (1 byte) : Mode Selection command
Data (9 bytes) : Data to be sent out
The data to be received from the tilt sensor module is as follow:
Source/Destination Stand/Mode Data CRC16
1 Byte 1 Byte 8 Bytes 2 Bytes
Source (4 bits) : Sender command
Destination (4 bits) : Receiver command
Stand (4 bits) : Position in either Single or Dual Axis
Mode (4 bits) : Mode Selection command
Data (8 bytes) : Received data
6.3. Initialization Command
Please send the following buffer to initialize the sensor through serial converter:
<< (To sensor): 0x06, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6.4. Commands for Source and Destination
Both the source and destination have the same command as listed below:
Command Descriptions
0x01 Sensor
0x06 Computer
0x07 Control Box
i.e. Command for selection of Single Axis Mode from Computer to Sensor 1:
Bekijk gratis de handleiding van Digi-Pas DWL5800XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL5800XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
