Digi-Pas DWL5800XY handleiding
Handleiding
Je bekijkt pagina 10 van 73
Digi-Pas
®
© 2023 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 4
DWL-5x000XY DATA SHEET
2.2. Mounting the Tilt Sensor Module
1. Two threaded holes (M4) are provided to mount the tilt sensor module in Single
Axis onto user-dened xtures/machinery.
2. Installation
2.1. Securing Tilt Sensor Module with Sensor Cord
1. Ensure the circular multipole connector is aligned to the receptacle on the sen-
sor module as illustrated on Figure 6(a).
2. Secure the rotatable ring by turning it clockwise as in Figure 6(b).
Figure 6. Steps to secure the tilt sensor module with sensor cord
a b
Figure 7. Two threaded holes (M4) is provided to mount the tilt sensor module in Single Axis
2. Two threaded holes (M4) are provided to mount the tilt sensor module in Single
Axis onto user-dened xtures/machinery.
44
14.5
60
M4x
8mmx2holes
19.5
80
108
120
90
60
78
5.1x 2 holes
Figure 8. Two 5.1mm diameter holes is provided to mount the tilt sensor module in Single
Axis
DWL-5000XY & DWL-5500XY DWL-5800XY
DWL-5000XY & DWL-5500XY DWL-5800XY
Bekijk gratis de handleiding van Digi-Pas DWL5800XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL5800XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
