Digi-Pas DWL5500XY handleiding
Handleiding
Je bekijkt pagina 9 van 73
Digi-Pas
®
© 2023 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 3
DWL-5x000XY DATA SHEET
1.4. Pinout of the Tilt Sensor Module and Sensor Cord
Pinout of the circular multipole connector from tilt sensor module is shown in Figure 4
Pinout of the sensor cord is shown in Figure 5
*Please verify the connection before power on the device. Wrong connection will lead to
device failure and may void your warranty.
Pin No. Description
1 GND
2 N.C (No Connection)
3 GND (without Control Box) or Signal 1 (For Control Box only)
4 GND (without Control Box) or Signal 2 (For Control Box only)
5 Power Input (Regulated 9V DC)
6 RS485 - A (Non-inverting Receiver Input/Tx+)
7 RS485 - B (Inverting Receiver Input/Tx-)
8 RS485 - Z (Inverting Driver Output)/Rx-) or RS232 - Rx
9 RS485 - Y (Noninverting Driver Output / Rx+) or RS232 - Tx
Figure 4. Pinout of the circular multipole connector of the tilt sensor module
Figure 5. Pinout of the sensor cord
User can customize their own cable, the specication and part number of the
circular connector for the sensor module cable as below:
Manufaturer : BINDER
P/N : 99 0425 70 08
NOTE
Bekijk gratis de handleiding van Digi-Pas DWL5500XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL5500XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
