Digi-Pas DWL5500XY handleiding
Handleiding
Je bekijkt pagina 12 van 73
Digi-Pas
®
© 2023 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 6
DWL-5x000XY DATA SHEET
3.1.1. Connection using USB through 5x000XY Control Box
3.1.1.1. Materials for the Conguration
• 1 × DWL5000XY, DWL5500XY, or DWL5800XY tilt sensor module secured with sensor
cord
• 1 × 12V DC Power Source
• 1 × Digi-Pas DWL5x00XYcontrol box
• 1 × USB cable
3.1.1.2. Conguration Setup Procedure
1. Secure the sensor cord with tilt sensor module as stated in 2.1 Securing Tilt Sensor Module
with Sensor Cord.
2. Connect the sensor cord to the sensor input on the Digi-Pas DWL5x00XYcontrol box.
3. Source in regulated 12V DC to the power supply input.
4. The Power LED (PWR) of the control box lights in orange color. Once the initialization be-
tween the sensor module and the control box is completed, the Power LED turns yellow.
The Sensor LED (SEN 1, SEN 2, SEN 3, SEN 4) on the respective sensor lights up in green
color. If the connection between the tilt sensor module and control box is lost, the Power
LED lights up in red.
5. Connect the USB cable from USB2.0 Standard-B Port on the control box to the PC as
shown in Figure 11.
Figure 11. Diagram for USB connection through control box using and ES-U-3001-M serial converter
6. The conguration is then completed. Users can obtain data throught PC Sync
software please refer to “4. Operation”
Bekijk gratis de handleiding van Digi-Pas DWL5500XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL5500XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
