Digi-Pas DWL3000XY handleiding
Handleiding
Je bekijkt pagina 21 van 22
Digi-Pas
®
© 2022 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
DWL-3000XY & DWL-3500XY Instruction Manual
18
DWL-3500XY Calibration Procedure:
Calibration tutorial video available on Digipas website, please visit the following link:
https://www.digipas.com/support/video.php
1. Power off the device. Press and hold the CAL button
while concurrently press the ON/OFF button to get
into calibration mode. “Calibration 1” will be shown
on display screen.
Place the device to Position 1. Press the MODE but-
ton once and wait until the countdown reach “0”,
the LCD screen displays “Calibration 2”.
2. Turn the device 180° to Position 2. Press the MODE
button again to start the calibration at “Position 2”
and wait until the countdown reach “0”, the LCD
screen displays “Calibration 3”.
3. Place the device to Position 3. Press the MODE but-
ton once and wait until the countdown reach “0”,
the LCD screen displays “Calibration 4”.
4. Turn the device 180° to Position 4. Press the MODE
button again and wait until the countdown reach
“0”, the LCD screen will switch to measuring mode
once calibration is completed.
Position 1
Position 2
Position 3
Position 4
Bekijk gratis de handleiding van Digi-Pas DWL3000XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL3000XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4145 MB |
