Deye SUN-7.6K-SG02LP2-EU-AM2 handleiding
Handleiding
Je bekijkt pagina 21 van 66
- 19 -
3.5 Grid connec�on and backup load connec�on
Please follow below steps to implement AC input/output connec�on:
· Before connec�ng to the grid, a separate AC breaker must be installed between the inverter
and the grid, and also between the backup load and the inverter.This will ensure the inverter
can be securely disconnected during maintenance and fully protected from over current. For
the 5/6/7.6/8/10/12kW model, the recommended AC breaker for backup load 5/6kW is 40A,
7.6/8kW is 63A, 10/12kW is 100A. For the 5/6/7.6/8/10/12kW model, the recommended AC
breaker for grid 5/6KW is 40A, 7.6/8KW is 63A, 10/12kW is 100A.
· There are three terminal blocks with "Grid" "Load"and "GEN" markings. Please do not misconnect
input and output connectors.
1. Before making Grid, load and Gen port connec�on, be sure to turn off AC breaker or
disconnector first.
2. Remove insula�on sleeve 10mm length, unscrew the bolts. For GRID port, just insert the wires
into the terminals according to polari�es indicated on the terminal block. For GEN and Load
ports, thread the wires through the magne�c ring firstly, then insert these wires into the
terminals according to polari�es indicated on the terminal block. Tighten the terminal screws
and make sure the wires are completely and safely connected.
All wiring must be performed by a qualified personnel.It is very important for
system safety and efficient opera�on to use appropriate cable for AC input
connec�on. To reduce risk of injury, please use the proper recommended cable
as below.
Note:
In final installa�on,breaker cer�fied according to IEC 60947-1 and IEC 60947-2
shall be installed with the equipment.
Chart 3-3 Recommended Size for AC wires
Model
5kW
Wire Size
8AWG
Cable(mm )
2
8.4
Torque value(max)
2.8Nm
6/7.6/8kW 6AWG 13.3 4.0Nm
10/12kW 4AWG 21.1 4.0Nm
Model
5kW
Wire Size
8AWG
Cable(mm )
2
8.4
Torque value(max)
2.8Nm
6/7.6/8kW 6AWG 13.3 4.0Nm
10/12kW 4AWG 21.1 4.0Nm
Grid connec�on and backup load connec�on (Copper wires) (bypass)
Grid connec�on and backup load connec�on (Copper wires)
Bekijk gratis de handleiding van Deye SUN-7.6K-SG02LP2-EU-AM2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | SUN-7.6K-SG02LP2-EU-AM2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9583 MB |
