Deye SUN-30K-SG02HP3-EU-AM3 handleiding
Handleiding
Je bekijkt pagina 11 van 63
For a proper ventilation of the inverter and avoid overheating, allow a clearance of approximately
50 cm around the inverter and at least 100 cm to the front as shown in the above figure.
Mounting the inverter
Remember that this inverter is heavy! Please be careful when lifting out from the package.
Choose the recommend drill head(as shown in below pic) to drill 4 holes on the wall,
62-70mm deep.
1. Use a proper hammer to fit the expansion bolt into the holes.
2. Screw out the nuts of the expansion bolts, align the holes of the mounting bracket with the 4
expansion bolts, and then push in the mounting bracket, tighten the nuts of expansion bolts.
3. Mount the inverter on the mounting bracket and use screws to fix the inverter with mounting
bracket.
Size: M8×80
≥500mm
≥500mm
Inverter mounting bracket installation
Bekijk gratis de handleiding van Deye SUN-30K-SG02HP3-EU-AM3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | SUN-30K-SG02HP3-EU-AM3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7788 MB |
