Deye SUN-30K-SG01HP3-AU-BM3 handleiding
Handleiding
Je bekijkt pagina 19 van 61
3.6.1 PV Module Selection:
3.6.2 PV Module Wire Connection:
When selecting proper PV modules, please be sure to consider below parameters:
1) Open circuit Voltage (Voc) of PV modules can not exceed max.PV Input Voltage of
inverter.
2) Open circuit Voltage (Voc) of PV modules should be higher than min.PV Input Voltage of inverter.
- 17 -
1. Switch the Grid Supply Main Switch(AC)OFF.
2. Switch the DC lsolator OFF.
3. Assemble PV input connector to the inverter.
Safety Hint:
Before connecting to inverter, please make sure that the open circuit voltage of
PV strings haven't exceeded the max.PV input voltage of the inverter.
Safety Hint:
Before connection, please make sure the polarity of PV array matches the
"DC+" and "DC-" symbols.
Pic 5.1 DC+ male connector
Pic 5.2 DC- female connector
Chart 3-5
PV Input Voltage
Inverter Model
PV Array MPPT Voltage Range
No. of MPP Trackers
No. of Strings MPP Tracker
600V (180V-1000V)
150V-850V
2+2+2 2+2+2+2
3 4
50kW40kW29.9kW 35kW
30kW
Note:
This inverter complies with IEC 62109-2 clause 13.9 for earth fault alarm
monitoring. If an Earth Fault Alarm occurs,the inverter will not connect to the
grid and will report an error F04 on its LCD.At the same time, the buzzer will
sound. For the machine installed with Wi-Fi/GPRS, the alarm informa on can be
seen on the corresponding monitoring website, and can also be received by the
APP on the mobile phone.
Bekijk gratis de handleiding van Deye SUN-30K-SG01HP3-AU-BM3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | SUN-30K-SG01HP3-AU-BM3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7923 MB |
