Deye SUN-3.6K-SG04LP1-AU handleiding
Handleiding
Je bekijkt pagina 21 van 54
- 19 -
Chart 3-5
PV Input Voltage
Inverter Model
SUN-3K-
SG04LP1-
24-AU
SUN-5K-
SG04LP1-AU
SUN-6K-
SG04LP1-AU
370V (125V~500V)
150V-425VPV Array MPPT Voltage Range
No. of MPP Trackers
No. of Strings per MPP Tracker
2
1+111
1
1+1
SUN-3K-
SG04LP1-AU
SUN-3.6K-
SG04LP1-AU
1+1
3.6.2 PV Module Wire Connec�on:
1. Switch the Grid Supply Main Switch(AC)OFF.
2. Switch the DC lsolator OFF.
3. Assemble PV input connector to the inverter.
Safety Hint:
When using PV modules, please ensure the PV+ & PV- of solar panel is not
connected to the system ground bar.
Safety Hint:
Before connec�on, please make sure the polarity of the output voltage of PV
array matches the “DC+” and “DC-” symbols.
Pic 3.1 DC+ male connector
Pic 3.2 DC- female connector
Safety Hint:
Before connec�ng inverter, please make sure the PV array open circuit voltage is
within the 500V of the inverter.
Note:
This inverter complies with IEC 62109-2 clause 13.9 for earth fault alarm
monitoring. If an Earth Fault Alarm occurs,the inverter will not connect to the
grid and will report an error F04 on its LCD.At the same �me, the buzzer will
sound. For the machine installed with Wi-Fi/GPRS, the alarm informa on can be
seen on the corresponding monitoring website, and can also be received by the
APP on the mobile phone.
Bekijk gratis de handleiding van Deye SUN-3.6K-SG04LP1-AU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | SUN-3.6K-SG04LP1-AU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8431 MB |
