Deye SUN-29.9K-SG01HP3-EU-BM3 handleiding

Niet gecategoriseerd

Deye

61 pagina's

PDF beschikbaar

Handleiding

- 09 -

For a proper ventilation of the inverter and avoid overheating, allow a clearance of approximately

50 cm around the inverter and at least 100 cm to the front as it can be seen at the picture below.

Mounting the inverter

Remember that this inverter is heavy! Please be careful when lifting out from the package.

Choose the recommend drill head(as shown in below pic) to drill 4 holes on the wall,

62-70mm deep.

1. Use a proper hammer to ﬁt the expansion bolt into the holes.

2. Screw out the nuts of the expansion bolts, align the holes of the mounting bracket with the 4

expansion bolts, and then push in the mounting bracket, tighten the nuts of expansion bolts.

3. Mount the inverter on the mounting bracket and use screws to ﬁx the inverter with mounting

bracket.

≥500mm

Inverter Moun�ng bracket installa�on

Size: M12×60

Bekijk gratis de handleiding van Deye SUN-29.9K-SG01HP3-EU-BM3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.