Deye SUN-18K-G04-LV handleiding
Handleiding
Je bekijkt pagina 20 van 62
Pic 5.13 Datalogger installation diagram
For the configuration of datalogger, please refer to illustrations of the datalogger.
Before starting the inverter, make sure that the inverter can meet the following conditions,
otherwise it may result in fire or damage to the inverter. In this case, we do not undertake
any responsibility. At the same time, to optimize the system configuration, it is recommended
that the two inputs be connected to the same number of photovoltaic modules.
a). The maximum open circuit voltage of each set of photovoltaic modules shall not exceed
800Vdc under any conditions.
b). Each input of the inverter better use the same type of photovoltaic module in series.
c). Total output power of PV shall not exceed the maximum input power of inverter, each
photovoltaic modules shall not exceed the rated power of each channel.
When installing the WiFi stick, tear off the sealing strip on the inverter. Insert the datalogger
into the interface and fix it with a screw. The configuration of the datalogger needs to be
performed after various electrical connections have been completed and the inverter DC
power on. When the inverter is on the DC power, it is determined whether the datalogger is
normally electrified (The LED light shines out of the shell).
- 17 -
5
WIFI
Met
Bekijk gratis de handleiding van Deye SUN-18K-G04-LV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | SUN-18K-G04-LV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6829 MB |
