Deye SUN-15K-SG01HP2-US-AM2 handleiding
Handleiding
Je bekijkt pagina 47 van 54
- 45-
Error code Descripon Soluons
F47
AC_OverFreq_Fault
Grid frequency out of range
1. Check the frequency is in the range of specification or not;
2. Check whether AC cables are firmly and correctly connected;
3. Seek help from us, if can not go back to normal state.
F48
AC_UnderFreq_Fault
Grid frequency out of range
1. Check the frequency is in the range of specification or not;
2. Check whether AC cables are firmly and correctly connected;
3. Seek help from us, if can not go back to normal state.
F52 DC_VoltHigh_Fault
F53 DC_VoltLow_Fault
BUS voltage is too high
1. Check whether battery voltage is too high;
2. check the PV input voltage, make sure it is within the allowed
range;
3. Seek help from us, if can not go back to normal state.
BUS voltage is too low
1. Check whether battery voltage is too low;
2. If the battery voltage is too low, using PV or grid to charge
the battery;
3. Seek help from us, if can not go back to normal state.
F58 Battery_comm_Lose
1, It tells the communication between hybrid inverter and battery
BMS disconnected when “BMS_Err-Stop” is active;
2, If don’t want to see this happen, you can disable
“BMS_Err-Stop” item on the LCD;
3, If the fault still exists, please contact us for help
F62 DRMs0_stop
F63 ARC_Fault
F64
Heatsink_HighTemp_Fault
1. ARC fault detection is only for US market;
2. Check PV module cable connection and clear the fault;
3. Seek help from us, if can not go back to normal state
F54 BAT2_VoltHigh_Fault
1. Check the battery 2 terminal voltage is high;
2. Restart the inverter 2 times and restore the factory settings;
3. Seek help from us, if can not go back to normal state.
F55 BAT1_VoltHigh_Fault
1. Check the battery 1 terminal voltage is high;
2. Restart the inverter 2 times and restore the factory settings;
3. Seek help from us, if can not go back to normal state.
F56 BAT1_VoltLow_Fault
1. Check the battery 1 terminal voltage is low;
2. Restart the inverter 2 times and restore the factory settings;
3. Seek help from us, if can not go back to normal state.
F57 BAT2_VoltLow_Fault
1. Check the battery 2 terminal voltage is low;
2. Restart the inverter 2 times and restore the factory settings;
3. Seek help from us, if can not go back to normal state.
1, the DRM function is for Australia market only;
2, Check the DRM function is active or not;
3, Seek help from us, if can not go back to normal state after
restart the system.
Heat sink temperature is too high
1. Check whether the working environment temperature is too
high;
2. Turn off the inverter for 10mins and restart;
3. Seek help from us, if can not go back to normal state.
Chart 7-1 Fault informa�on
Bekijk gratis de handleiding van Deye SUN-15K-SG01HP2-US-AM2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | SUN-15K-SG01HP2-US-AM2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8034 MB |
