Deye BOS-G Pro handleiding
Handleiding
Je bekijkt pagina 24 van 59
21
According to customer needs, if the customer needs less than 8 battery packs (1~7
battery packs +1 high voltage box), then the customer can choose a simple rack.
Note: Simple bracket is optional.
The installation Procedure of the simple mounting rack is shown in the figure.
4.5.2 Installation of Rack
1. Take out the two left and right welding frames, and fix the four beams on the upper and
lower sides of the beams with hex combination screws(Broken lacquer flakes and Round
head hexagon socket combination·screws' combination way is in the following figure) and
hex wrenches, respectively, to form a rectangular frame.
2. Fix the upper and lower diagonal supports to the left and right welding frames using round
head hex combination screws and hex wrenches.
3. Screw the base into the bottom plate and secure it with hexagonal wrench or by hand.
4. When installation is complete, stand the rack up.
5. To fix the rack on the wall, use a hexagonal wrench to install the rack fastener on the socket
combination screw hole above the rack and fix it with the socket combination screw. Fix the
other side of the rack with the wall using round head hexagon combination screws. To fix
two racks together, install the rack fasteners on the hexagon socket combination screw holes
above the frame, and fix them together with hexagon socket combination screws and nuts.
Please refer to installation guide for details.
Bekijk gratis de handleiding van Deye BOS-G Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | BOS-G Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13342 MB |
