Deye BOS-A handleiding
Handleiding
Je bekijkt pagina 54 van 57
53
7. Maintenance and upgrade
Warning! Improper decommissioning may cause damage to the equipment and/or
battery inverter.
Before maintenance, ensure that BOS-A is decommissioned according to relevant provisions.
Note: All maintenance work shall comply with local applicable regulations and standards.
The USB disk port of BOS-A has the functions of upgrading firmware and recording battery
data, which can be used as an auxiliary tool.
7.1 Maintenance of BOS-A
To ensure safe operation, all plug connections must be checked. If necessary, relevant operators
shall press them back into place at least once a year.
The following inspection or maintenance must be carried out once a year:
• General visual inspection
• Check all tightened electrical connections. Check the tightening torque according to the values
in the following table. Loose connections must be retightened to the specified torque.
Connection mode Tightening torque
High-voltage control box grounding 4.5Nm
Fixing the lug of the high-voltage control box 1.2Nm
Fixing the lug of the battery module 1.2Nm
• Using the monitoring software, check whether the SoC, SoH, battery voltage and temperature
of the battery module are abnormal.
• Shut down and restart BOS-A once a year.
Note: If the system is installed in a polluted environment, maintenance and cleaning must be
carried out at short intervals.
Note: Clean the battery rack with a dry-cleaning cloth. Ensure that no moisture comes into
contact with the battery connections. Do not use solvents.
Bekijk gratis de handleiding van Deye BOS-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | BOS-A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7475 MB |
