Deye BOS-A handleiding
Handleiding
Je bekijkt pagina 24 van 57
23
4.5.2 Installation of Rack
1. Take out two side beams and upper and lower crossbeams to form a rectangular frame,
connect with side beams and crossbeams using big tripods and small tripods, and then fix
big and small triangular supports with side beams and crossbeams using M6*12 outer
hexagon cross combination screws and a PHILIP2 # screwdriver.
2. Use a PHILIP2 # screwdriver and M6*12 outer hexagon cross combination screws to fix the
L-bracket assembly horizontally on the side beam.
3. Fix the diagonal brace on two side beams using M6*12 outer hexagon cross combination
screws and a screwdriver.
4. Fix the four bottom plates on four corners of the lower rack using the M6*12 outer hexagon
cross combination screws and a PHILIP2# screwdriver.
5. Screw the base into the bottom plate and fix it with a PHILIP2# screwdriver or by hand.
6. To fix the rack on the wall, use a PHILIP2# screwdriver to install the rack fastener at the M6
screw hole above the rack and fix it with M6*12 outer hexagon cross combination screws.
Fix the other side of the rack with the wall using M6*100 expansion screws. To fix two racks
together, install the rack fastener at the M6 screw hole above the rack, and fix them
together with M6*12 outer hexagon cross combination screws and M6 nuts.
Note: Please read the manual for reference.
Bekijk gratis de handleiding van Deye BOS-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | BOS-A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7475 MB |
