Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 77 van 84
77
u
Symptom Action Page
Power turns automatically o.
This is normal and due to the Auto Power O function. If necessary, set the parameter of the Auto
Power O function.
If you don’t need the power to turn o automatically, turn the 'AUTO OFF' setting 'Disable'.
70
The instrument does not turn on.
Is the AC adaptor/power cord correctly connected to an AC outlet and to the VIVO S2?
NOTE
Do not use any AC adaptor or power cord other than the ones included. Doing so will cause
malfunctions.
14
Could you have turned the power on again immediately after turning the power o?
Allow an interval of at least ve seconds before turning the power on again.
-
No sound from the VIVO S2's OUTPUT sockets.
Did you switch the VIVO S2 on? 18
Could the [VOLUME] knob be turned down? Select a higher setting. -
Did you selected a sound (organ or orchestral)? 22, 26
Could the part volume settings have been minimized?
Check the 'LEVEL' setting of each part.
61
The volume level of the instrument is too low when
it is connected to an amplier.
Could you be using a connection cable that contains a resistor?
Use a connection cable that doesn’t contain a resistor.
-
Insucient volume from a device connected to the
VIVO S2’s INPUT jack.
Could you be using a connection cable that contains a built-in resistor? Use a connection cable that
does not contain a resistor.
-
Could the AUDIO IN Level be down? Select a higher setting. 67
Insucient volume from or to a device connected to
the VIVO S2’s USB port.
Could the USB AUDIO Input Level be down? Select a higher setting. 67
Could the USB AUDIO Output Level be down? Select a higher setting 67
The keyboard volume is lower than the Song
playback volume.
The volume level for the keyboard performance is set too low. Adjust the volume balance to increase
the keyboard volume via the Song Control Menu.
51
The pitch of the instrument is incorrect.
Is the 'Tuning' or 'Temperament' setting appropriate? Check the parameters. 65
Did you transpose the instrument? 32
A 'buzz' is heard from the external amplier.
Is the external amplier or other device used with the VIVO S2 connected to a dierent AC power
outlet?
Connect the amplier or other device to the same AC outlet as the VIVO S2.
-
The noise may be due to interference caused by the use of a mobile phone in close proximity to the
instrument.
Turn o the mobile phone, or use it further away from the instrument.
-
After connecting theVIVO S2’s USB COMPUTER port
to your computer, the VIVO S2 may not receive MIDI
messages.
This could be because the VIVO S2 is set to receive on a MIDI channel that the MIDI controller is not
transmitting on. Adjust the MIDI controller's transmit channel accordingly.
67
Unable to read from/write to USB Memory.
Check the format of your USB Memory. The VIVO S2 can use USB Memory that has been formatted as
FAT. If your USB Memory was formatted using any other method, please re-format it as MS-DOS FAT.
17
Can’t save to USB Memory.
Could the USB Memory be write protected? -
Is there sucient free space on the USB Memory? -
Audio recording won’t start or stops unexpectedly. Is there sucient free space on the USB Memory? -
The songs won’t play.
The le type of the song is not one of the le types that the VIVO S2 can play. 50
It may be that the song data is damaged. -
This 'dexi-piano-xx' model name does not appear in
the Bluetooth device list of your mobile device.
Have you made the instrument visible to other devices? 57
The music data played back by the mobile device
cannot be heard through the VIVO S2.
Was the pairing function initiated between this unit and the mobile device? 57
Troubleshooting
23
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
