Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 71 van 84
71
Eects Types and Parameters List
1: Thru
The eects processor is bypassed.
2: EP Tremolo
This eect cyclically modulates (Speed) the amplitude (Intensity) to
add tremolo to the sound. It's the electric piano typical eect.
Parameter Setting Explanation
Speed 0.10 ~ 12.50 Hz Sets the speed of the tremolo eect.
Intensity 0 ~ 100 Depth to which the eect is applied.
3: Equalizer
This is a four-band stereo equalizer (low, mid x 2, high).
Parameter Setting Explanation
Low Freq 40 ~ 400 Hz Selects the frequency of the low range.
Low Gain -12 ~ 0 ~ +12 Adjusts the gain of the low frequency.
High Freq 400 Hz ~ 8 KHz Selects the frequency of the high range.
High Gain -12 ~ 0 ~ +12 Adjusts the gain of the high frequency.
Mid1 Freq 100Hz ~ 4 KHz Selects the frequency of the Mid1 range.
Mid1 Gain -12 ~ 0 ~ +12 Adjusts the gain of the Mid1 frequency.
Mid1 Q 0.5 ~ 12.0
Move this parameter to adjusts the width
of the area around the Middle 1 frequency
that will be aected by the Gain setting.
Higher values of Mid1 Q set narrowest
area.
Mid2 Freq 100Hz ~ 4KHz Selects the frequency of the Mid2 range.
Mid2 Gain -12 ~ 0 ~ +12 Adjusts the gain of the Mid2 frequency.
Mid2 Q 0.5 ~ 12.0
Move this parameter to adjusts the width
of the area around the Middle 2 frequency
that will be aected by the Gain setting.
Higher values of Mid2 Q set narrowest
area.
4: Vibrato
Vibrato is a musical eect consisting of a regular, pulsating change
of pitch. It is used to add expression to instrumental music.
Parameter Setting Explanation
Rate 0.10 ~ 12.50 Hz Sets the speed of the vibrato eect.
Intensity 0 ~ 100 Allows you to set the vibrato intensity.
5: Flanger
This eect gives a signicant swell and movement of pitch to the
sound. It produces a metallic resonance eect.
Parameter Setting Explanation
Rate 0.10 ~ 12.50 Hz Adjust the modulation speed.
Intensity 0 ~ 100 Allows you to set the anger intensity.
Feedback -96 ~ +96 %
Adjusts the proportion of the anger
sound that is fed back into the eect.
Negative (–) settings will invert the phase.
Parameter Setting Explanation
Balance 0 ~ 100
Balance the Volume between the direct
and the eect sound.
PreDelay 0 ~ 100 ms
Adjusts the delay from the direct signal
and the moment when the anger starts
working.
Phase 0 ~ 180 deg
This sets the LFO phase dierence
between the left and right, in steps of 10
degrees It give more spatial of the sound.
6: Chorus
This eect adds thickness and warmth to the sound by modulating
the delay time of the input signal. You can add spread to the sound
by osetting the phase of the left and right LFOs from each other.
Parameter Setting Explanation
Rate 0.10 ~ 12.50 Hz Adjust the modulation speed.
Intensity 0 ~ 100 Allows you to set the chorus intensity.
Feedback -96 ~ +96 %
Adjusts the proportion of the chorus
sound that is fed back into the eect.
Negative (–) settings will invert the phase.
Balance 0 ~ 100
Balance the Volume between the direct
and the eect sound.
PreDelay 0 ~ 100 ms
Adjusts the delay from the direct signal
and the moment when the chorus starts
working.
Phase 0 ~ 180 deg
This sets the LFO phase dierence
between the left and right, in steps of
10 degrees.
7: Phaser
This eect creates a swell by shifting the phase. It is very eective
on electric piano sounds. You can add spread to the sound by
osetting the phase of the left and right LFOs from each other.
Parameter Setting Explanation
Rate 0.10 ~ 12.50 Hz Adjust the modulation speed.
Intensity 0 ~ 100 Allows you to set the phaser intensity.
Feedback -96 ~ +96 %
Adjusts the proportion of the phaser
sound that is fed back into the eect.
Negative (–) settings will invert the phase.
Phase 0 ~ 180 deg
This sets the LFO phase dierence
between the left and right, in steps of
10 degrees.
8: Reverb
This eect adds reverberation to the sound, simulating an acoustic
space as a room or a larger halls or stadiums.
Parameter Setting Explanation
Level 0 ~ 127 Set the quantity of Reverb eect
Damping 0 ~ 127
Adjusts the amount of damping of the
room (Carpet, Wood, Brick, Concrete,
Marble).
Higher values increase the amount of
high-frequency attenuation.
Room Size 0 ~ 127
It determines the size of the simulated
room.
Width 0 ~ 127
Adjusts the stereo width of the Reverb
eect.
Higher value increase the stereo width.
Appendix
22
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
