Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 48 van 84
48
Working with the Memories
1. Press the [MENU] button and select MEMORYRENAME.
The list of Internal Memory is shown:
2. Use the [][] buttons to move the cursor inside the list
in the position you want to rename the Memory.
3. Press the 'RENAME' Function button to conrm.
The display changes to:
4. Use the [][] and the [][] buttons to rename the
Memory. See "Assigning the Name You Specify" (p. 21) for
details.
5. Press the 'OK' Function button to conrm the name.
The memory will be renamed and the list of Internal Memory is
shown.
Exporting a Memory Set in the USB
Memory
Use this function for exporting the Internal Memory Set in the USB
Memory (commercially available).
This function is useful to create special sets for each event and import
them at your convenience.
You can also use this function to backup the Internal Memories.
1. Connect an USB memory to the VIVO S2. For details see p.
16.
A USB icon appears in the Icons eld of Main page. See "Main Page"
(p. 20).
2. Press the [MENU] button and select MEMORYEXPORT SET.
The display shows a list of all les and folders on the USB storage
device you have just connected.
3. Use the [][] buttons to scroll through folders to select
the destination folder.
Use the 'OPEN' Function button to enter in a folder.
If you opened a folder by mistake, press the [ ] button to return to
a higher level.
4. Press the 'EXPORT' Function button to conrm your
selection.
The display changes to:
A Memory Set name is suggested by the VIVO S2.
5. If you want to name the Memory Set, see "Assigning the
Name You Specify" (p. 21) for details.
6. Press the 'OK' Function button to export the Memory Set.
A message conrm the operation.
NOTE
You should always safely eject the USB Memory before
physically unplugging it from USB socket. Before to unplug
the USB Memory use the 'USB REMOVE' function. See "Safely
Remove the USB Memory Device" (p. 17).
Importing a Memory Set from the USB
Memory
Use this function for importing Sets from the USB Memory (commercially
available) to Internal Memory.
1. Connect an USB memory that contains Memory Sets to
the VIVO S2. For details see p. 16.
A USB icon appears in the Icons eld of Main page. See "Main Page"
(p. 20).
2. Press the [MENU] button and select MEMORYIMPORT SET.
The display shows a list of all les and folders on the USB storage
device you have just connected.
3. Use the [][] buttons to scroll through folders to select
the Memory Set to import.
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
