Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 43 van 84
43
Parameters to be edited
Parameter Setting
Leakage 0 ~ 127
Hum noise
The sound of the organ is produced by an electro-magnetic
pick-up. So some hum is normal and unavoidable in an electro-
mechanical organ. If you think you suer from excessive hum, you
can modify the level.
Parameter Setting
Hum noise 0 ~ 127
Click On Noise and Click O Noise
Some electro-mechanical organs have an audible pop or click when
a key is pressed or released. Originally, key click was considered
a design defect and the designers worked to eliminate or at
least reduce it with equalization lters. Over time has become a
characteristic part of the sound and it has been accepted as part of
the classic sound. Use this parameter to adjust the amount of click
noise.
Parameter Setting
Click On Noise
0 ~ 127
Click O Noise
Perc. Manual
It's the classic crisp attack unique to the vintage organ. See "Adding
Harmonic Percussion" (p. 27). The percussion is a typical register in
the Main manual. With this parameter, you can choose which part of
the keyboard (MAIN or LOWER) to add the percussion eect.
Parameter Setting
Perc. Manual Main, Lower
Expression Min
The expression pedal is an important control for many musical
instruments including organs. Use this parameter to set the
minimum value of the expression when the pedal is lifted.
Parameter Setting
Expression Min 0 ~ 127
Express. Tone
When the volume falls, the sound of the high or low frequencies
becomes dicult to hear. When this parameter is set to 'On', when
the volume falls, the low frequency are less attenuated than Mid/
high frequencies.
Parameter Setting
Express. Tone O, On
Brilliance
This parameter is enabled when you select a Pipe organ type. You
can adjust the brightness of sound.
Parameter Setting
Brilliance -12 ~ +12
Rotary
M
M
Treble Speakers
Unit (Horns)
Motor of the
Treble Unit
Tuning Unit
Bass Speaker Unit
Motor of the
Bass Unit
Bass Rotate Unit
Rotary Block Diagram
Rotary Type
This parameter determines the mode of rotation.
Parameter Setting Explanation
Rotary Type A, B
A: Normal simulation.
B: Advanced simulation. Already introduced on
J7 and S9 with previous OS 4.06, this eect is
our latest generation of Rotary Speaker eect
conceived with a new algorithm that makes
the entire depth and the simulation of the horn
and bass speakers rotations even more truthful.
Accelerations and decelerations are so accurate
that you have the perception to virtually see
the moving speakers adding this essential
character to your organ performances.
Rotary Noise
This is the noise when the motor is running. Use this parameter to
adjust the amount of the noise.
Parameter Setting
Rotary Noise 0 ~ 127
Horn Slow RPM and Horn Fast RPM
These parameters adjust the speed of the horn rotor at the slow
and fast mode.
Parameter Setting
Horn Slow RPM 20 ~ 100
Horn Fast RPM 300 ~ 500
Horn RampUp and Horn RampDw
These parameters set the time for the horn rotors to 'ramp up' and
to 'ramp down' when switching from slow to fast (Horn RampUp) or
when switching from fast to slow (Horn RampDw).
Rotor speed
Slow
Fast
t
RPM
RampUp RampDw
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
