Dexibell VIVO H6 handleiding
Handleiding
Je bekijkt pagina 24 van 76
24
Selecting Tones
The display shows a conrmation message.
The position of the sound you selected is memorized and will be
recalled every time you press the corresponding Tone button.
The instrument will remember your choice at the next power-on.
Playing Two Sounds Over the Entire
Keyboard (Layer)
In the previous paragraph "How to Select Tones", you learned how to select
a Tone. Below you'll learn how to add a second sound over the entire
keyboard.
1. Press the [ ] button to add a second tone (Coupled
Part) over the entire keyboard.
Coupled Part
Main Part
+
The Coupled part [C] is automatically selected.
If the main page is displayed shows:
The Coupled part [C] eld on the main page is underlined to inform
you that the tone selection is applied on this part.
NOTE
For Tone selection, it would be a good idea to check on the main
page which part is currently selected to ensure that you don’t
select a Tone for the wrong part.
2. Play the keyboard.
You’ll hear the tones of the Main part [M] and Coupled part [C]
playing together.
3. To adjust the volume move the [VOLUME] knob.
4. To change the tone of the Coupled part, see "How to Select
Tones" (p. 23).
5. To select the Main part, from the main page, use the []
[] buttons to select it.
6. To change the tone of the Main part, see "How to Select
Tones" (p. 23).
Splitting the Keyboard Range and
Playing Two Dierent Tones
Split mode enables you to play two dierent voices on the keyboard, one
with the left hand and another with the right hand.
1. If you want to use your left and right hands to play
dierent tones, press the [
] button.
The Keyboard is divided into two sections. The region of the
keyboard to the left of the split point becomes the Lower part,
while the region of the keyboard to the right of the split point
becomes the Main part.
Main Part
Lower Part
If the main page is displayed shows:
The Lower part [L] eld on the main page is underlined to inform
you that the tone selection is applied on this part.
2. Play the keyboard.
Turn the [VOLUME] knob to adjust the volume.
MEMO
The default split point is set between keys E3 and F3. To change
the split point, see "How to Change the Split Point" (p. 24) .
3. To change the tone of the Left part, see "How to Select
Tones" (p. 23).
4. To select the Main part, from the main page, use the []
[] buttons to select it.
5. To change the tone of the Main part, see "How to Select
Tones" (p. 23).
How to Change the Split Point
1. Press and hold the [ ] button until the display
shows the following page.
Bekijk gratis de handleiding van Dexibell VIVO H6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO H6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15557 MB |
