DeWalt DXV20SPTA handleiding
Handleiding
Je bekijkt pagina 23 van 100
CLEANING
To keep the wet/dry vacuum looking its best, clean
the outside with a cloth dampened with warm water
and mild soap.
To clean the tank:
1. Dump out debris.
2. Wash tank thoroughly with warm water and mild
soap.
3. Wipe with dry cloth.
21
TROUBLESHOOTING
WARNING:
TO REDUCE THE RISK OF INJURY FROM
MOVING PARTS AND/OR ELECTRICAL SHOCK,
TURN POWER SWITCH OFF AND DISCONNECT
GROUNDED PLUG FROM ELECTRICAL OUTLET
BEFORE PERFORMING TROUBLESHOOTING
CHECKS.
customer service.
English
PROBLEM SOLUTION
Motor does not run
Check power cord, plugs and outlet.
Ensure the on/off switch is in the
ON position ( I )
Remove blockages in the nozzle,
extension wands
Replace the disposable dust bag.
Empty dust tank, refer to EMPTY
THE TANK under OPERATING
INSTRUCTIONS.
Check for proper installation of
Suction capacity
decreases
Vacuum stops
running
Thermal overload has been tripped:
1. Turn the vacuum off and
disconnect vacuum cleaner from
power source.
2. Empty the dust tank, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an
appropriate outlet and turn on/off
switch to the ON position ( I ) to
test.
replace if necessary.
are secure.
Check for proper installation of the
Dust comes out
while vacuuming
WARNING:
If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or
WARNING:
for example COVID-19. Follow all local, state and federal
guidance on general cleaning practices.
YEAR
LIMITED
GUARANTEE
3
TOOL GUARANTEE
Bekijk gratis de handleiding van DeWalt DXV20SPTA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DeWalt |
| Model | DXV20SPTA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19750 MB |
