DeWalt DXF2043 handleiding
Handleiding
Je bekijkt pagina 5 van 20
ENGLISH
3
WARNING:
Use only extension cords that are rated for
outdoor use. Extension cords in poor condition
or that are too small in wire size can pose re
and shock hazards. To reduce the risk of these
hazards when using an extension cord, be sure
it is in good condition and that the connection
does not come into contact with liquid. To keep
power loss to a minimum, use the following
table to choose the minimum wire size
extension cord.
Power
Speed
Weight
Power Cord
PRODUCT SPECIFICATIONS
Model
120V / 60 Hz / 120W
3
10kgs
SJT 18AWGX3C 6ft
DXF2042
Extension Cord
Length
Wire Gauge
A.W.G.
0 - 50 ft.
14
1250 - 100 ft.
Do not touch fan motor when in use. This
motor is hot when in use, to avoid burns, do
not let bare skin touch hot surfaces.
Fans have arcing or sparking parts inside. Do
not use near combustible materials or ammable
gases or sources of heat. DO NOT USE in
areas where gasoline, paint or ammable
materials are used or stored. To prevent a
possible re, do not block air intakes or exhaust
READ&SAVE THESE
INSTRUCTIONS
Use this fan only in dry environments. This fan
is not intended for use in a bathroom, laundry
area, or similar locations, or near sinks, washing
machines, swimming pools or other sources
of water. Never locate fan where it may fall into
a bathtub or other water receptacle. Do not
use in damp environments such as ooded
basements.
WARNING: Shock Hazard
WARNING: Hot Surfaces
WARNING: Fire Hazard
Do not use with damaged cord or plug. Use
with adequate electrical system that is up to
code.
WARNING:
Electrical Shock Hazard
in any manner. Do not insert or allow foreign
objects to enter any ventilation or exhaust
opening as this may cause an electric shock,
re, or damage the fan.
WARNING: To Prevent Electric Shock
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock,
check with a qualied electrician or service
p
erson if you are in doubt as to whether the
outlet is properly grounded. Do not modify the
plug provided with the appliance- if it will not t
t
he outlet, have a proper outlet installed by a
qualied electrician.
WARNING: To Reduce The Risk Of Or
Electric Shock
Do not use this product with any solid-state
speed control device.
GROUNDING
INSTRUCTIONS
In the event of malfunction or breakdown,
grounding provides a path of least resistance
for electric current to reduce the risk of electric
shock. The fan must be connected to a cord
having an equipment-grounding conductor and
a grounding plug. The plug must be plugged
into an appropriate outlet that is properly
installed and grounded in accordance with all
local codes and ordinances.
DANGER:
Improper connection of the
equipment grounding conductor can result in
a risk of electric shock. The conductor with
ins
ulation having an outer surface that is green
with or without yellow stripes is the equipment
grounding conductor. If repair or replacement
of the cord or plug is necessary, do not connect
the equipment-grounding conductor to a live
terminal. Check with a quali
ed electrician or
service person if the grounding instructions are
not completely understood, or if in doubt as to
whether the fan is properly grounded. Do not
modify the plug connected to the fan – if it will
not t the outlet, have a proper outlet installed
by a qualied electrician.
FOR GROUNDED, CORD-CONNECTED
FAN RATED LESS THAN 15A AND
INTENDED FOR USE ON A NOMINAL 120V
SUPPLY CIRCUIT
Bekijk gratis de handleiding van DeWalt DXF2043, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DeWalt |
| Model | DXF2043 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3699 MB |
