DeWalt DXAM2815 handleiding
Handleiding
Je bekijkt pagina 12 van 71
8
English
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK,DO NOT USE THIS AIR MOVER WITH ANY
SOLID-STATE SPEED CONTROL DEVICE.
Follow these instructions to operate the air mover:
•
•
•
•
•
•
Unpack air mover from carton.
To use the unit, place the unit in the area most
suitable for the application. Several factors need
to be considered; the unit must be placed close
enough to an AC outlet to be plugged in, there
must be a minimum clearance of two feet from
and the unit should not be placed where it can
become a tripping or safety hazard (Fig B).
Place unit in the proper operating position for the
application. Refer to the operating positions
section in this manual.
Plug unit into the wall.
Turn unit on and select the air speed by turning the
switch clockwise which is located near the top handle.
When the drying job is completed, turn the unit
off and follow the directions for Storage in this
manual.
customer service.
TROUBLESHOOTING
WARNING: Unplug before any
disassembly or servicing.
WARNING: All disassembly and repairs
should be performed by qualified
personnel.
CAUTION: Once the unit is plugged in, the air
mover can be turned on by rotating the switch to
one of the settings shown in Fig C.
AIR MOVER OPERATING POSITION (Fig
D,E)
The air mover may be set in one of two operating
positions. Pick the position best suited for the
application.
Use the down position for applications such as:
drying wet oors, shampooed carpets, etc. To use
this position simply place unit on its base.
Use the up position for applications such as: drying
paint on the ceiling. To use this position, lay the unit
on the back side with the front grill pointing towards
the ceiling.
•
•
UNPACKING AND CHECKING CARTON
CONTENTS (Fig F,G)
Carefully unpack and inspect the Air Mover.
Contact customer service if any parts are
damaged or missing.
This Air Mover includes a retractable handle, It is
packaged in its locked lowest position.
STORAGE (Fig H)
THE AIR MOVER SHOULD BE STORED INDOORS.
•
•
Before storing air mover it should be cleaned.
Wrap the power cord around the carry handle on the
top of the unit to keep it untangled.
To clean the air mover, use a cloth dampened only with
water and mild soap.Never let any liquid get inside the
air mover. Never immerse any part of the air mover into
a liquid.
CAUTION:
1
Putt
2
Power switch
3
Handle
4
Roller
5
Cam wrench
DESCRIPTION (Fig. A)
WARNING : Never modify the power appliance or
any part of it. Damage or personal injury could result.
CAUTION:
This Air mover is equipped with a motor thermal
protection device. Once activated, it can restart without
notice. If it is triggered, turn switch to OFF position,
unplug unit and wait a moment before plugging
air mover back in and restarting it.
Bekijk gratis de handleiding van DeWalt DXAM2815, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DeWalt |
| Model | DXAM2815 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10222 MB |
