DeWalt DCPS3386 handleiding
Handleiding
Je bekijkt pagina 5 van 24
3
English
• Do not hold vibrator head when starting the tool or
during operation. Serious personal injury mayresult.
• Ensure switch is in the off position and disconnect
battery pack before cleaning the vibrator head or hose.
• Use gloves when cleaning the vibrator head. Concrete
is caustic and may cause personalinjury.
• Keep hands and body parts clear of immediate workarea.
• Do not overreach. Maintain proper footing and balance at all
times. This enables better control of the tool in unexpectedsituations.
• Use both hands for safe handling of this tool. This tool
should not be used while standing on aladder.
• This tool is intended only for vibrating concrete. Any
other use of the product may cause serious personalinjury.
• Actuating tool may result in flying debris, collation
material or dust which could harm operator’s eyes. The
operator and all those persons in the general area should
wear approved safety glasses with permanently attached
side shields. Approved safety glasses are imprinted with the
characters “Z87.1”. It is the employer’s responsibility to enforce
the use of eye protection equipment by the tool operator and
other people in the workarea.
• Actuating tool may result in flying debris, collation
material or dust which could harm operator’s eyes. To
minimize risk of flying debris only operate tool while vibrator
head is fully submerged in the wet, mixed, pouredconcrete.
• Do not use tool in a concrete mixer. Serious personal
injury may result.
• Disconnect battery pack from the tool whenever assembling
or disassembling the tool, performing any maintenance or
repair, moving the tool or when the tool isunattended.
• When assembling or disassembling the hose from the
power unit, the internal hose core may act like a spring.
Slowly separate the hose from the power unit, while wearing
eye protection and gloves to prevent personalinjury.
• Do not alter or modify the tool in anyway.
• Do not use tool in or around grain hoppers, flammable
dust, gases or fumes. The tool may produce a spark that
could ignite gases causing anexplosion.
• Do not contact the vibrator head to any part of your
body while it isrunning.
• Do not point the tool at co-workers or yourself at any time.
No horseplay! Work safe! Respect the tool as a workingimplement.
e ) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly
maintained powertools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier tocontrol.
g ) Use the power tool, accessories and tool bits, etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardoussituation.
h ) Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the tool
in unexpectedsituations.
5) Battery Tool Use and Care
a ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another
batterypack.
b ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a
risk of injury andfire.
c ) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or afire.
d ) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause
irritation orburns.
e ) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk ofinjury.
f ) Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may causeexplosion.
g ) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk offire.
6) Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool ismaintained.
b ) Never service damaged battery packs. Service of
battery packs should only be performed by the manufacturer
or authorized serviceproviders.
Additional Safety Rules for Concrete Vibrators
• The tool is designed for long period of usage, the
vibration level is below 5m/s². Use gloves to provide extra
cushion, take frequent rest periods, and limit daily time ofuse.
• Keep hands away from moving parts. Never place
your hands near the vibratorhead.
Additional Safety Information
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury couldresult.
WARNING: ALWAYS use safety glasses. Everyday eyeglasses
are NOT safety glasses. Also use face or dust mask if operation is
dusty. ALWAYS WEAR CERTIFIED SAFETYEQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratoryprotection.
WARNING: This product contains lead, a chemical known
to the State of California to cause cancer and birth defects or
other reproductive harm.
WARNING: Some dust contains chemicals known to
State of California to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead‑based paints,
• crystalline silica from bricks and cement and other masonry
products, and
• a
rsenic and chromium from chemically treatedlumber.
Bekijk gratis de handleiding van DeWalt DCPS3386, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DeWalt |
| Model | DCPS3386 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3856 MB |
