DeWalt DCMWSP660 handleiding
Handleiding
Je bekijkt pagina 48 van 228
6
EnGLIsh
Battery Pack(s)
Important Safety Instructions for All
BatteryPack(s)
When ordering replacement battery pack(s), be sure to include
catalogue number andvoltage.
The battery pack(s) is not fully charged out of the carton.
Before using the battery pack(s) and charger, read the safety
instructions below. Then follow charging proceduresoutlined.
READ ALL INSTRUCTIONS
• Do not charge or use battery in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Inserting or removing the battery from the charger may
ignite the dust orfumes.
• Never force battery pack(s) into charger. Do not modify
battery pack(s) in any way to fit into a non‑compatible
charger as battery pack(s) may rupture, causing serious
personalinjury.
• Charge the battery pack(s) only in DEWALTchargers.
• DO NOT splash or immerse in water or otherliquids.
• Do not store or use the tool and battery pack in locations
where the temperature may fall below 4 ˚C (39.2 ˚F)
(such as outside sheds or metal buildings in winter), or
reach or exceed 40 ˚C (104 ˚F) (such as outside sheds or
metal buildings in summer).
• Do not incinerate the battery pack(s) even if it is severely
damaged or is completely worn out. The battery pack(s)
can explode in a fire. Toxic fumes and materials are created
when lithium-ion battery pack(s) areburned.
• If battery contents come into contact with the skin,
immediately wash area with mild soap and water. If
battery liquid gets into the eye, rinse water over the open eye
for 15minutes or until irritation ceases. If medical attention
is needed, the battery electrolyte is composed of a mixture of
liquid organic carbonates and lithiumsalts.
• Contents of opened battery cells may cause respiratory
irritation. Provide fresh air. If symptoms persist, seek
medicalattention.
WARNING: Burn hazard. Battery liquid may be flammable
if exposed to spark orflame.
WARNING: Never attempt to open the battery pack(s) for
any reason. If battery pack(s) case is cracked or damaged,
do not insert into charger. Do not crush, drop or damage
battery pack(s). Do not use a battery pack(s) or charger
that has received a sharp blow, been dropped, run over or
damaged in any way (i.e., pierced with a nail, hit with a
hammer, stepped on). Electric shock or electrocution may
result. Damaged battery pack(s) should be returned to
service centre forrecycling.
WARNING: Fire hazard. Do not store or carry the
battery pack(s) so that metal objects can contact
exposed battery terminals. For example, do not place
the battery pack(s) in aprons, pockets, tool boxes, product
kit boxes, drawers, etc., with loose nails, screws, keys,etc.
CAUTION: When not in use, place tool on its side on
a stable surface where it will not cause a tripping or
falling hazard. Some tools with large battery pack(s) will
stand upright on the battery pack(s) but may be easily
knockedover.
Transportation
WARNING: Fire hazard. Transporting batteries can
possibly cause fire if the battery terminals inadvertently
come into contact with conductive materials. When
transporting batteries, make sure that the battery
terminals are protected and well-insulated from
materials that could contact them and cause a short
circuit. NOTE: Lithium-ion batteries should not be put in
checkedbaggage.
DEWALT batteries comply with all applicable shipping
regulations as prescribed by industry and legal standards, which
include UN Recommendations on the Transport of Dangerous
Goods; International Air Transport Association (IATA) Dangerous
Goods Regulations; International Maritime Dangerous Goods
(IMDG) Regulations; and the European Agreement Concerning
The International Carriage of Dangerous Goods by Road
(ADR). Lithium-ion cells and batteries have been tested to
section 38.3of the UN Recommendations on the Transport of
Dangerous Goods Manual of Tests andCriteria.
In most instances, shipping a
DEWALT
battery pack(s)
will be excepted from being classified as a fully regulated
Class9Hazardous Material. In general, only shipments containing
a lithium-ion battery with an energy rating greater than 100Watt
Hours (Wh) will require being shipped as fully regulated Class9.
All lithium-ion batteries have the Wh rating marked on the pack.
Furthermore, due to regulation complexities,
DEWALT
does
not recommend air shipping lithium-ion battery pack(s) alone
regardless of Wh rating. Shipments of tools with batteries (combo
kits) can be air shipped as excepted if the Wh rating of the battery
pack(s) is no greater than 100Wh.
Regardless of whether a shipment is considered excepted
or fully regulated, it is the shipper's responsibility to consult
the latest regulations for packaging, labeling/marking and
documentationrequirements.
The information provided in this section of the manual is
provided in good faith and believed to be accurate at the time
the document was created. However, no warranty, expressed or
implied, is given. It is the buyer’s responsibility to ensure that its
activities comply with the applicableregulations.
Storage Recommendations
1. The best storage place is one that is cool and dry away from
direct sunlight and excessive heat or cold. For optimum
battery performance and life, store battery pack(s) at room
temperature when not inuse.
2. For long storage, it is recommended to store a fully charged
battery pack(s) in a cool, dry place out of the charger for
optimalresults.
nOTE: Battery pack(s) should not be stored completely
depleted of charge. The battery pack(s) will need to be
recharged beforeuse.
Bekijk gratis de handleiding van DeWalt DCMWSP660, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DeWalt |
| Model | DCMWSP660 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 42588 MB |
