DeWalt DCMPS640 handleiding
Handleiding
Je bekijkt pagina 36 van 192
34
EnGLISh
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or seriousinjury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTUREREFERENCE
a
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to thesesymbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or seriousinjury.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or seriousinjury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderateinjury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
EC-Declaration of Conformity
Machinery Directive
o
Pole Saw
DCMPS635, DCMPS640
DeWALT declares that these products described under
Technical Data are in compliance with: 2006/42/EC, EN62841-
1:2015+A11:2022, EN ISO 12100:2010.
EC type-examination by VDE Prüf- und Zertifizierungsinstitut
GmbH, Merianstraße 28, 63069 Offenbach, Germany.
Notified Body number : 0366 / IDnumber: 40059376
2000/14/EC, Annex V. Category Annex I: item 6
L
PA
(measured sound power level) 102 dB
L
WA
(guaranteed sound power level) 105 dB
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
16.12.2024
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised
test given in EN 62841-1, EN ISO 22868, EN ISO 22867 and may
be used to compare one tool with another. It may be used for a
preliminary assessment ofexposure.
WARNING: The declared vibration and/or noise
emission level
represents the main applications of the tool. However, if the tool is
used for different applications, with different accessories or is poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce
the exposure level over the total workingperiod.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of workpatterns.
DCMPS635 DCMPS640
Voltage V
DC
54 54
Type 1 1
Battery type Li‑Ion Li‑Ion
Bar Length cm 25 30
Maximum Chain Speed (no‑load) m/s 15.6 21.3
Maximum Cutting Length cm 20 25
Oil Capacity ml 95 95
Weight (without battery pack) kg 6.9 7.3
L
PA
(emission sound pressure level at no load) dB(A) 87 90
L
WA
(sound power level at no load) dB(A) 97 101
K (uncertainty for the given sound level) dB 2.2 2.2
Vibration emission value a
h
= m/s
2
5 5.1
Uncertainty K = m/s
2
1.5 1.5
WARNING: Read all safety warnings, instructions,
illustrations, and specifications in this manual,
including the battery and charger sections provided in
an original tool manual or the separate Batteries and
Chargers manual. Manuals can be obtained by contacting
Customer Service (refer to the back page of thismanual).
Technical Data
English (original instructions)
POLE SAW
DCMPS635, DCMPS640
Bekijk gratis de handleiding van DeWalt DCMPS640, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DeWalt |
| Model | DCMPS640 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 34401 MB |
