Denon DJ DN-M2300R handleiding
Handleiding
Je bekijkt pagina 35 van 38
35
ENGLISH
HANDLING CARTRIDGES
Discs are stored inside cartridges, so they can be handled easily without worrying about dust or fingerprints. Be careful of the following in order to
keep recordings in optimum condition.
MESSAGES
Messages appear on the display when operating the set.
The meanings of the messages are described below.
• Keep cartridges away from magnets and sources of strong
magnetic forces. (Only for recordable discs)
• Put cartridges in their cases when carrying them.
• Do not apply labels other than the ones included when the
discs are purchased.
• Use a soft, dry cloth to wipe any dirt off the surface of the
cartridge.
• Do not open the shutter.
Forcing the shutter open could break it.
If the shutter is opened, dirt or dust may get inside and
fingerprints may get on the disc.
• Do not bend, heat or throw cartridges.
• Water droplets may form on the surface if cartridges are moved
suddenly from outside or any cold place to a warm place. If this
happens, wait awhile before using them.
(1) Cautions on Handling
(2) Cautions on Storing
• Always remove cartridges from the set after recording or playing
them.
• Do not put cartridges in the following places:
• Places exposed to direct sunlight.
• Hot places.
• Humid or dusty places.
Message Description
Indicates that editing was not possible.
Indicates that the track number cannot be incremented by pressing the REC button during recording.
Recording is not possible because of a problem in the TOC recording enable data.
Indicates that editing is complete.
Indicates that the cue search operation is being performed. (* is the cue number.)
Displayed at the beginning of the track name if cue signals are set for that track.
There is no more remaining time on the disc, or there are already 255 tracks on the disc.
Recording or editing is not possible with pre-mastered discs.
Displayed when changing the presettings if there is a problem with the memory storage operation.
Displayed when a system error occurs.
A and B points are set.
Displayed if there is a problem with the memory storage operation when the presettings have been reset
(initialized).
Displayed when initializing the presettings.
No hot start data.
Indicates that no track name or disc name has been set.
Indicates that no program has been input.
Indicates discs containing disc names but no tracks.
Data other than audio data is input.
Cue direct search mode is on.
Hot start data is loaded.
Loop is turned on.
This means that a program has been input.
Program is preset. (* - 1 to 3)
Displayed if you attempt to program a 26 th step.
Displayed when you attempt to record or edit while the cartridge is in the accidental erasure prevention mode.
Indicates the sleep mode.
Displayed when you attempt to set the recording mode on a disc containing 255 tracks.
Displayed while the UTOC is being written.
8
9
Can
,
tEdit **
Can
,
tIncrmnt
Can
,
t Rec!
Complete!
Cue*
<Cue>********
Disc Full
DiscType Err
EEPROM Error
Error **
Exist A-B!
InitialError
Initial Set
No Data
No Name
No Program!
No Track
Not Audio!
Now Cue Src!
Now H Start!
Now LOOP ON!
Now Program!
LOOP button function is set 1/ALL REPEAT MODE.
Now Repeat!
PresetProg*!
Program Full
Protected
Sleep
Track Full
UTOC Writing
Bekijk gratis de handleiding van Denon DJ DN-M2300R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Denon DJ |
| Model | DN-M2300R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5433 MB |
