Delta Dore Tybox RF 210 handleiding
Handleiding
Je bekijkt pagina 15 van 19
15
6. Associating a receiver
or a repeater with a Tybox Control
In the case of a new associaon (products purchased separately) or aer a
reset, or when adding an addional receiver or repeater, you must associate
them.
❶ Press the receiver/repeater
buon for 3 seconds unl the
red LED ashes. Release the
buon.
❷ If the thermostat has already
been associated with a receiver,
repeatedly press MODE (T1) to
switch to Shutdown mode (
AUTO
or
AUTO
).
❸ Press MODE (T1) for 5
seconds unl rAd is displayed.
Conrm with √ (T4).
❹ The screen displays Add.
Conrm with √ (T4).
❺ The ashing digit corresponds
to the number of receivers/
repeaters previously associated.
The display ashes as long as the associaon between the thermostat
and the receiver/repeater is not complete.
When the display stops ashing, it updates the number of associated
receivers/repeaters.
The light on the receiver/repeater also stops ashing.
7. Associating a door/window
magnetic contact
Associang a door/window magnec
contact, if the window is open,
allows you to switch the heang to frost
protecon or the air condioning to O
(within 10 seconds).
❶ Press and hold the receiver buon for
three seconds unl the light ashes red.
❷ Briey press the detector buon.
❸ Make sure that the receiver LED
has stopped ashing.
❷
❶
T4
❸ ❹
T1 T4
... ... ...
> 3s
T4
> 5s
❺
OFF
T1 T4
❷
❸
❶
... ... ...
> 3s
OFF
When combined with a door/window magnec
contact, parameter i41 automacally switches
to "on".
Bekijk gratis de handleiding van Delta Dore Tybox RF 210, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Delta Dore |
| Model | Tybox RF 210 |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 2757 MB |
