Handleiding
Je bekijkt pagina 11 van 60
1111
C
B
A
BACKGUARD (models
PRO66MXLPZ, PRO66MALPZ
only
)
Before installing the cooker, assemble
the backguard “C”.
The backguard “C” can be found
packed at the rear of the cooker.
1. Before assembling, remove any
protective lm/ adhesive tape.
2. Remove the two spacers “A” and
the screw “B” from the rear of the
cooktop.
3. Assemble the backguard as
shown in gure 5 and x it by
screwing the central screw “B”
and the spacers “A”.
MOVING THE COOKER
WARNING: When raising cooker to upright position always ensure two people carry out
this manoeuvre to prevent damage to the adjustable feet (g. 6a).
WARNING - Be careful: Do not lift the cooker by the door handle when raising to the
upright position (g. 6b).
WARNING: When moving cooker to its nal position DO NOT DRAG (g. 6c). Lift feet clear
of oor (g. 6a).
Figure 5
Figure 6a Figure 6b
L
Figure 7
Figure 6c
IMPORTANT (
models PRO66MXLPZ,
PRO66MALPZ only
):
When handling the cooker, take care not to
damage the door sensor lever “L” (g. 7)
(near the top left corner of the oven seal).
L
Bekijk gratis de handleiding van Delonghi PRO66MXLPZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Delonghi |
| Model | PRO66MXLPZ |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 5778 MB |
